Hi Chris,

I've seen prices ranging from $400-$1000 per gallon. You can contact me off
list for specific vendors. You might want to look for an Australian company
to avoid international shipping.

Cheers,
Steve

------------------------------
Stephen Romaniello
Assistant Research Scientist
School of Earth & Space Exploration
Arizona State University
Tempe, AZ  85287
m. 860-462-6906

On Mon, Jul 9, 2018 at 9:33 PM, Christian Dietz <[log in to unmask]> wrote:

> I would also be interested in a cost estimate. On the Lesker website one
> needs to fill out forms first.
> We may have some 10L of used Fomblin piled up, all still very clear, it may
> be worth a try getting it recycled.
> cheers
> Chris
>
> On 10 July 2018 at 02:31, James Kababick <[log in to unmask]> wrote:
>
> > I would be interested in learning about options too.  We just shelled out
> > $900 for 1 liter of oil.
> >
> > Sincerely,
> >
> > James Neal-Kababick
> > Director
> > Flora Research Laboratories, LLC
> > DEA Registered & Inspected Laboratory
> > Fellow AOAC International
> > Vice Chair USP <2251> SUDDA Expert Panel
> > United States Pharmacopeia NBDS Expert Committee
> > USP BDS & Herbal Medicines/NBDS General Chapters Expert Subcommittee
> > USP Joint Standards Setting Subcommittee for Reference Standards (JS3)
> > United States Pharmacopeia Dietary Protein Expert Committee
> > Adjunct Faculty Bastyr University
> > Botanical Medicine Department
> > 1-541-472-0980 phone
> > [log in to unmask]
> > www.floraresearch.com
> >
> >
> > CAUTION:
> > This e-mail and its accompanying attachments, if any,  may contain
> > information that is confidential and subject to legal privilege. If you
> are
> > not the intended recipient, you are notified that any use, dissemination,
> > distribution or copying of this message is prohibited. If you have
> received
> > this  message in error, please notify Flora Research Laboratories
> > immediately and destroy all copies of this message and the accompanying
> > attachments. Thank you.
> >
> > -----Original Message-----
> > From: PLASMACHEM-L: Analytical Chem.(ICP's, DCP's, MIP's). [mailto:
> > [log in to unmask]] On Behalf Of Stephen Romaniello
> > Sent: Sunday, July 08, 2018 11:59 AM
> > To: [log in to unmask]
> > Subject: Recycled PFPE Vacuum Pump Oil?
> >
> > Hi All,
> >
> > Does anyone have experience with recycling PFPE vacuum oil (Fomblin,
> > Krytox, F4, etc)? There are several companies that appear offer this as a
> > service (Ideal Vac, Kurt Lesker, TMC industries, Vac Oil, Precise Pump
> > Fluid).
> >
> > What is your perception of the recycled oil quality? Are there any
> > companies that work with smaller batch sizes (<1 gallon)?
> >
> > PFPE works great in ICP-MS applications but it would be nice to save a
> few
> > bucks because it's fairly expensive to buy new.
> >
> > Thanks!
> > Steve
> >
> > -----------------------------------------
> > Stephen Romaniello
> > Assistant Research Scientist
> > School of Earth & Space Exploration
> > Arizona State University
> > Tempe, AZ  85287
> > m. 860-462-6906
> >
>
>
>
> --
> Please consider the environment before printing this e-mail
>
>
>
> *University of Tasmania │CSL - Isotope Ratio Mass Spectrometry*
>
> Dr. Christian Dietz, Facility Manager *│*Private Bag 74, Hobart, 7005
> Tasmania
>
>  ( Tel: (+61) 3 6226 7820, cell phone: (+61) 4 9780 8570 *│*URL: Central
> Science Laboratory
> <http://www.utas.edu.au/research/central-science-laboratory>
>
>
> This message is intended exclusively for its adressee and may contain
> information that is CONFIDENTIAL and protected by professional privilege.
> If you are not the intended recipient you are hereby notified that any
> dissemination, copy or disclosure of this communication is strictly
> prohibited by law. If this message has been received in error, please
> immediately notify us via e-mail and delete.
>