You can put Stick-on teflon sheet on top or just an acrylic sheet
Dr. Otto Herrmann, Technical Director, Kinectrics Inc, Toronto, Ontario, Canada M5Z 5G5 - from my BlackBerry 10 smartphone on the TELUS network.
From: Corey Lambert
Sent: Thursday, June 7, 2018 8:27 AM
To: [log in to unmask]
Reply To: PLASMACHEM-L: Analytical Chem.(ICP's, DCP's, MIP's).
Subject: Re: balance table suppliers
If this if for a teaching lab, I would highly advise you to avoid marble at
all costs. Marble is highly porous. In our new building the marble was
stained within a month once classes began. We have tried to seal it but to
no avail. We are now putting aluminum plates under the balance to avoid
chemicals from staining the tables. Also marble is very reactive to acid.
I would suggest a concrete table. They can be sealed.
University of Michigan-Dearborn
Department of Natural Sciences
Dearborn MI, 48126
On Thu, Jun 7, 2018 at 6:59 AM, Tom Bobal <[log in to unmask]> wrote:
> Dear Andrew,
> I use a marble table I purchased from my local lab supply house, and the
> balance is stable to less than 0.1mg.
> Best regards,
> Thomas Bobal
> Senior Metallurgist
> Coining, Inc
> 15 Mercedes Drive
> Montvale, NJ 07645
> o: 201-791-4020, x125
> m: 609-558-0627
> -----Original Message-----
> From: PLASMACHEM-L: Analytical Chem.(ICP's, DCP's, MIP's). [mailto:
> [log in to unmask]] On Behalf Of Dobney Andrew
> Sent: Thursday, June 07, 2018 6:56 AM
> To: [log in to unmask]
> Subject: [Marketing Mail] balance table suppliers
> ***NOTICE*** This came from an external source. Use caution when replying,
> clicking links, or opening attachments.
> Hi folks,
> Does anyone have suggestions for a supplier of a balance table for an
> analytical balance?
> Apart from Sartorius, Mettler-Toledo etc.
> Dr. Andrew Dobney
> Instrumental Analysis
> +32 14 33 32 96
> SCK•CEN ǀ Belgian Nuclear Research Centre Boeretang 200 - BE-2400 Mol
> sXnpckS46%2By6E%3D&reserved=0 : [log in to unmask]
This transmission contains information which may be confidential and which may also be privileged. It is intended for the named addressee only. Unless you are the named addressee, or authorized to receive it on behalf of the addressee, you may not copy, use, or disclose it to anyone else. If you have received this transmission in error, please contact the sender. Thank you for your cooperation.
Kinectrics Inc. 800 Kipling Avenue, Unit 2 Toronto, Ontario, Canada M8Z 5G5