Good morning, how are you doing?
It is possible to add a unit (like mmol/L) to Smart Analyzer Vision.
I can send you screenshots of how to do it, but that will off-line (as we cannot add attachments to the list).
Remember that the units defined in Smart Analyzer Vision are already related to each other, and the base unit it ppt or ng/L. All other units are then related to it by a certain factor (e.g. 1,000,000 ng/L = 1 mg/L). Adding a unit that does not relate to other units in the same fashion may create problems - you'll have to ensure that you do not try to convert from mmol/L to other units, like mg/L (as the relation depends upon the molar mass of the substance).
Team Leader - Laboratories
Direct +613 9565 9860
Mobile +614 0146 7390
HRL Technology Group Pty Ltd
Level 1, Unit 4
677 Springvale Road
Mulgrave VIC 3170
Phone +613 9565 9888
Fax +613 9565 9879
ABN 89 609 887 327
This email and any attachments (Communication) are confidential, privileged or private and intended solely for the use of the individual or the entity to whom they are addressed (Intended Recipient). They may also contain intellectual property belonging to HRL. HRL does not owe or accept any duty or responsibility to unauthorised recipients of the Communication. If you are not the Intended Recipient, any dissemination, copying, use of the Communication or reliance on the information is strictly prohibited. If you have received this transmission in error please delete it immediately from your system and inform us by email on [log in to unmask] If you are the Intended Recipient of this email, any advice contained in the Communication is provided on the terms set out at the following link: HRL Technology email and attachment disclaimer and terms http://www.hrl.com.au/term-and-conditions.html.
By opening or reading the Communication you will be taken to have accepted those terms.
From: PLASMACHEM-L: Analytical Chem.(ICP's, DCP's, MIP's). [mailto:[log in to unmask]] On Behalf Of Yayu Li
Sent: Tuesday, 31 July 2018 23:12
To: [log in to unmask]
Subject: Meaning of Unit (ppm, ppb, ppt) in standard definition of SmartAnalyzerVision software
Sorry to bother you all.
I am using a ICP-AES with the SmartAnalyzerVision software. When creating the standard definition, there are several units to chose, such as mg/L, mg/g, ppm, ppb and ppt. I want the units to be mmol/L, but I could not find the unit from the list. How could I add the unit to the list?
Thanks very much.
Department of Plant Science and Landscape Architecture University of Connecticut
This message has been scanned for malware by Websense. www.websense.com